How to Wax Your Snowboard at Home — Step by Step
Waxing your snowboard at home is easy and cheap. Follow this step-by-step guide using a basic iron, wax, and scraper for a smoother glide.
On this page
Waxing your own board is one of the most satisfying beginner skills, and it saves money over a whole season. With a cheap iron, a block of wax, and a scraper, you can do it on the kitchen table in about twenty minutes.
What You Need
- All-temperature snowboard wax. One block lasts many waxes.
- A waxing iron or an old clothes iron with no steam holes.
- A plastic scraper and a stiff nylon brush or cloth.
- Two chairs or a stable surface to lay the board flat, base up.
The Steps
- Clean the base. Wipe away dirt and old wax with a dry cloth.
- Set a low iron temperature. The wax should melt smoothly, never smoke. Smoking means too hot.
- Drip wax onto the base. Hold the block against the iron and let drops fall in a zig-zag line down the board.
- Iron it in. Spread the wax evenly, keeping the iron moving so you never scorch one spot.
- Let it cool fully. Wait at least thirty minutes, ideally an hour.
- Scrape off the excess. Pull the scraper from tip to tail in long strokes. You want a thin, even layer, not a thick crust.
- Brush or buff. A final brush reveals the base structure and adds glide.
How Often
For a beginner riding a few days at a time, waxing before each trip is plenty. If the base looks white and dry mid-trip, it is time for another coat.
A freshly waxed board deserves a great destination. Use Bonvo to preview your resort in 3D and pick the wide, gentle runs where that smooth glide will feel amazing.
Founder of Bonvo, Budapest